1.67g NaDCC Detergent Chlorine Tablets Plus 1 x 2L Dilution Bottle

Description

Prosan Plus Detergent Chlorine Tablets are the Simple and Accurate way to make a one-stage detergent chlorine solution.

Prosan Plus is similar to Chlor Clean & Actichlor Plus – a 1,000 ppm available chlorine solution with a low foaming detergent action.

Fast- dissolving One-Stage Detergent Solution with a Broad-spectrum Anti-Microbial Agent

Use for Blood Spills, General Clinical Disinfection, Terminal Isolation & Outbreak Cleans.

• 1 tablet in 1 Litre = 1,000 parts per million chlorine solution
• Also Mopping, Sinks, Drains & Catering Areas
• Accurate & Measurable for Due Diligence
• Non-corrosive*
• Our tablets have undergone extensive testing against:
  • EN13697 – Fungicidal Activity
  • EN13704 – Sporicidal Activity
  • EN14476 – Coronavirus
  • EN1276   – Bactericidal Activity
  • EN17126 –  C.Difficile
  • EN1650  – Fungi & Yeast
  • EN13727 – Bactericidal Activity
• DEFRA Approved:     NOTE:  Requires special label – use Agritabs brand

Chlorine Test Kits available.

*Prosan Plus is virtually non-corrosive on most common metals like stainless steel, aluminium & galvanised mild steel.

Top Tip: Prosan Detergent Sanitiser Bleach Tablets are the same as Chlor Clean and Actichlor Plus 

Used for a variety of disinfection tasks in Hospital, Food Production & Catering, Care, Nursing, Dental and many more applications.

Typical Uses in Private & Public Health areas:

• Floor & Tile Mopping in Hospitals
• Non metallic medical and veterinary appliances
• Cloths and Glassware
• General disinfection
• Body fluid spills
• Drains, Sinks, W.C’s
• Laboratory Discard jars
• Conditions of heavy soiling
• Veterinary hygiene
• General hygiene
• Food preparation areas; non metallic equipment, containers, consumption utensils, work surfaces, stainless steel (catering grade)

Typical Uses and dilutions:

Guidelines for the use of Detergent Chlorine Tablets (DCS) for mops & cloths:

• After cleaning mops or cloths, dissolve 1 tablet in 10 Litres of hot water to produce 100 ppm of sanitising solution.
• Immerse the cloth or mop in the solution for at least 30 minutes.
• Do not soak overnight.

Guidelines for the use of  3.25g DST for food preparation surfaces & food processing equipment:

• Remove loose debris with a clean, loosely-folded cloth.
• Wash with a hot neutral detergent solution and cloth. An abrasive nylon pad may also be useful.
• Rinse with hot water and a clean cloth.
• Drop one 3.25g DST into 5 Litres of water, preferably hot/warm (40°C) to provide 200 ppm of available chlorine. (Warm water assists the process of disinfection and also speeds up the tablet dissolution time.)
• Thoroughly wet the cleaned surface with the disinfecting solution by the most suitable means, e.g. trigger spray or disposable cloth.
• Leave wet for a minimum of 3 minutes. (Providing the surface is thoroughly clean this is sufficient contact time for positive disinfection.)
• Rinse off with fresh, clean water.
• Allow to air-dry or use disposable paper towel.

IN THE CASE OF DANGEROUS OR ELECTRICAL EQUIPMENT (E.G. SLICING MACHINES), PRELIMINARY SAFETY PROCEDURES AND FINAL SAFETY CHECKS WILL BE REQUIRED, SEVERAL TYPES OF EQUIPMENT WILL NEED PARTIAL OR COMPLETE DISMANTLING TO ENSURE EFFECTIVE CLEANING AND DISINFECTION.

WARNING:  TO BE EFFECTIVE, DISINFECTANT SOLUTIONS MUST BE MADE UP FRESH EACH DAY AND BE OF CORRECT CONCENTRATION.

Guidelines for the use of Tablets in NHS, Dental etc: 

NOTE:  All of the above information is offered without any implied warranty or indemnity.  The user should satisfy themselves that the product is being used in accordance with local guidelines and instructions.